Mechanical Integrity Report
 |
Advanced Manufacturing Institute |
AMI tested multiple luminaires with DuraStreet products installed to ensure mechanical stability. Each luminaire tested was able to withstand loadings from 7 – 20 times the weight of the DuraStreet unit without failure. Download the AMI Static Testing Report for luminaires with the DuraStreet light engine installed. |
Product Safety
|
ETL Cortland, New York www.intertek.com |
The ETL Listed Mark is the fastest growing certification mark in North America, widely accepted by AHJs and building code officials. EcoFit products have been tested by ETL and are in compliance with the following standards:
ETL/UL 8750 and ETL/UL 1598 reports are available upon request. |
 |
CSA International Toronto, Ontario, Canada www.csa-international.org |
CSA International is a provider of product testing and certification services for electrical, mechanical, plumbing, gas and a variety of other products. EcoFit products have been tested by ETL and are in compliance with the following standards:
Download the CSA 22.2 #250.0, CSA 22.2 #60950-1 and CAN/CSA 22.2 #170.1 reports. |
 |
Council of the European Union Brussels, Belgium www.consilium.europa.eu |
The CE marking certifies that a product has met European Union (EU) consumer safety, health or environmental requirements. |
Product Performance
Surge Protection
 |
ETL |
To reduce the risk of damage from lighting strikes and other electrical transients, EcoFit’s products contain protection circuitry capable of dissipating a 10kV surge, tested by ETL in accordance with IEEE 62.41 and IEEE 62.45.5-C3. Download the ETL Surge Protection Testing Report. |
Noise and Transient Protection (Ring Wave)
|
ETL |
EcoFit’s products comply with FCC Class A Operation, in accordance with FCC 47CFR15/18. Download the ETL FCC Report. |
Pole Vibration
 |
Quanta Labs |
Responsible street lighting design prescribes pole vibration testing to ensure that wind or other forces do not cause a failure of the pole under extreme conditions. EcoFit’s units have been tested for both ANSI-prescribed pole vibration standards (1.5G and 3.0G dwell, per ANSI C136.31.) Download the Quanta Laboratories pole vibration testing reports for two representative cobra head luminaires: Sample 1 and Sample 2. |
Corrosion
|
ETL |
EcoFit products have been tested to ASTM B117 requirements to ensure long-term exposure to harsh environments does not create corrosion risk. Download the ETL Corrosion Testing Report. |
Ingress Protection
|
ETL |
EcoFit products have been tested to comply with IP-66 standards for liquid and particle intrusion. Download the ETL IP-66 Testing Report. |